We are engaged in manufacturing and supplying a range of Shot Blasting Machines, which is widely used in Automotive, Steel and Engineering Industry. Our products include Swing Table Shot Blasting Machine, Tumblast Shot Blasting Machine and Spinner Hanger Shot Blasting Machine. Fabricated by experienced professionals using highly advanced production techniques, our products are in compliance with the well-defined industry standards. We offer customization of these machines according to the requirements and specifications of our customers.
Product Details:
Minimum Order Quantity | 1 Piece |
Number of Doors | Single Door |
Machine Type | Wheel Blasting |
Capacity | 0-5 ton/day |
Size | 5 CFT |
Application | SHOT BLASTING / GRIT BLASTING / SHOT PEENING |
Automatic Grade | Automatic |
SHOT BLASTING MACHINE: This airless centrifugal shot blasting machine with continuously tumbling components is most effective component cleaning process prior to machining
BLASTING CABIN: This main blasting chamber is fabricated out of 6 mm thick M.S plates and properly lined for abrasive resistance
Wheel unit model.: RLM 150.:
The wheel unit is centrifugal RADIAL LOCK (RLM UNIT).an easily removable steel guard equipped with replaceable long life alloy liners encloses the wheel unit. Wheel unit consists of blade, impeller and control cage for easy adjustable blasting control. The blades are held in place by centrifugal force is inserted through the center of the wheel. Electric motor with V belts drives the wheel unit
We are giving latest radial lock design wheel units with soundabrators to muffle the noise below 85 db at 1 m. the entire wheel unit fitted with alloy liners (15%Chromium,2%Molybdenum) which has a hardness of 55 to 60 RC which gives long life of to liners. This is our special composition,
ABRASIVE RECYCLING: Rubber Conveyor with 10mm Dia holes drain the abrasive from blasting area gravity hopper with screen separates the abrasive from the other metals and from elevator boot section. Abrasive is conveyed through the buckets to top of the elevator and recycled through main rotor.
DUST COLLECTOR: Bag type dust collector has 61 Sq. m (approx) areas which are with main blast chamber and with 50 Cu. mtr/min capacities. It collects as well as exhausts all dusts, fine etc from the main blast chamber.
ELECTRICAL CONTROLS: The entire machine with dust collector is fully under panel controls with ample safety factor. Control panel mainly consists of measuring instruments, switch gear controls, including air break contractors, relays etc the entire panel circuitry is auto linked for both free usage and ratings have ample safety factor.
Product Details:
Minimum Order Quantity | 1 Piece |
Number of Doors | Double Door |
Material to be Blasted | Roller Conveyor, Beam, Plate, Angle Bar, Pipe |
Brand | Techno Bright Industries |
Machine Type | Wheel Blasting |
Material to be Casted | Aluminium, Zinc |
Capacity | 0-5 ton/day |
Automatic Grade | Automatic |
Product Details:
Machine Type | Wheel Blasting |
Material To Be Blasted | paver blocks |
Number Of Doors | Single Door |
Capacity | 0-5 ton/day |
Automation Grade | Automatic |
Country of Origin | Made in India |
Product Details:
Capacity | 0-5 ton/day |
Brand | TECHNO BRIGHT INDUSTRIES |
Machine Type | Wheel Blasting |
Number of Doors | Single Door |
Size | 27*36 |
Automatic Grade | Semi-Automatic |
Product Details:
Minimum Order Quantity | 1 Piece(s) |
Machine Type | Wheel Blasting |
Usage/Application | Online Conveyor |
Material To Be Blasted | Pipe |
Number Of Doors | Continous |
Surface Finish | SAE 2-2.5 |
Power Required | 20HP |
Capacity | 10-15 ton/day |
Automation Grade | Automatic |
SHOT BLASTING MACHINE: This airless centrifugal shot blasting machine with continuous conveyor type is most effective component cleaning process prior to Painting and Quality check
BLASTING CABIN: This main blasting chamber is fabricated out of 6 mm thick M.S plates and properly lined for abrasive resistance
Wheel unit model.: RLM 150.:
The wheel unit is centrifugal RADIAL LOCK (RLM UNIT).an easily removable steel guard equipped with replaceable long life alloy liners encloses the wheel unit. Wheel unit consists of blade, impeller and control cage for easy adjustable blasting control. The blades are held in place by centrifugal force is inserted through the center of the wheel. Electric motor with V belts drives the wheel unit
We are giving latest radial lock design wheel units with soundabrators to muffle the noise below 85 db at 1 m. the entire wheel unit fitted with alloy liners (15%Chromium,
2%Molybdenum) which has a hardness of 55 to 60 RC which gives long life of to liners. This is our special composition,
ABRASIVE RECYCLING: Rubber Conveyor with 10mm Dia holes drain the abrasive from blasting area gravity hopper with screen separates the abrasive from the other metals and from elevator boot section. Abrasive is conveyed through the buckets to top of the elevator and recycled through main rotor.
DUST COLLECTOR: Bag type dust collector has 61 Sq. m (approx) areas which are with main blast chamber and with 50 Cu. mtr/min capacities. It collects as well as exhausts all dusts, fine etc from the main blast chamber.
ELECTRICAL CONTROLS: The entire machine with dust collector is fully under panel controls with ample safety factor. Control panel mainly consists of measuring instruments, switch gear controls, including air break contractors, relays etc the entire panel circuitry is auto linked for both free usage and ratings have ample safety factor.
Product Details:
Minimum Order Quantity | 1 Number |
Capacity (kg) | 250 |
Automation Grade | Automatic |
Number Of Doors | Single Door |
Usage/Application | Industrial |
Surface Finish | Color Coated |
Power Source | Electric |
Condition | New |
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | Spinner Hanger |
Usage/Application | Spinner |
Material To Be Blasted | Ferrous and Non ferrous |
Number Of Doors | Double Door |
Surface Finish | SAE 2-2.5 |
Power Required | 20HP |
Ideal for Aluminium Bigger Components, Castings etc..,
Product Details:
Brand | TECHNO BRIGHT INDUSTRIES |
We manufacture wide range of Tumblast Shot Blasting Machine. These are widely used in various industrial applications, which do not damage the job during tumbling. The products give uniform cleaning, suitable for casting weighing 1 Kgs., to 100Kgs. The design employs endless conveyor belt made of steel, links or rubber belts. Further, More than 600 Tumblast machines are in operation in Foundry, Forging and with Auto Component manufacturers, Railways & Defense.
We offer 1 / 2 / 5/ 7 / 14 / 28 / 34 Cubic Feet Rubber Conveyor or Steel Conveyor.
Specifications:
Capacity : Rubber Conveyor 250 kgs,
Steel Conveyor 300 kg
Product Details:
Minimum Order Quantity | 1 Number |
Machine Type | Wheel Blasting |
Usage/Application | Tumbling / Spinner |
Surface Finish | SAE 2-2.5 |
Power Required | 20HP |
Capacity | 5-10 ton/day |
Automation Grade | Automatic |
Country of Origin | Made in India |
AIRLESS CENTRIFUGAL 3 Cft Tumblast Shot Blasting Machine
Machine comprises:-
Product Details:
Minimum Order Quantity | 1 No(s) |
Machine Type | Wheel Blasting |
Usage/Application | Blast Cleaning of ferrous and non ferrous parts |
Material To Be Blasted | Any part |
Number Of Doors | Double Door |
Surface Finish | SAE 2.5 |
Power Required | 30 HP |
Capacity | 5-10 ton/day |
Automation Grade | Semi-Automatic |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Maximum Component Size | 400mm |
Cycle Time | 5 mins |
Features | PLC - Auto |
Capacity | 200 kgs |
Number Of Blast Wheels | 1 |
Country of Origin | Made in India |
AIRLESS CENTRIFUGAL 3 Cft Tumblast Shot Blasting Machine
Machine comprises:-
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 500 Kg |
Air Flow Rate | 85 CFM |
Application | Surface Cleaning |
Material | Mild Steel |
Automation Grade | Semi Automatic |
Power | 2 Hp |
Max. Temperature | 70 |
Voltage | 220 V |
Product Details:
Minimum Order Quantity | 1 Number |
Machine Type | Wheel Blasting |
Usage/Application | Spinner |
Number Of Doors | Double Door |
Surface Finish | SAE 2-2.5 |
Power Required | 20HP |
Capacity | 5-10 ton/day |
General Description: The machine consists of a main blast cabinet, generally as shown on drawing upon which are mounted two standard belt driven wheels positioned as to give the blast best possible coverage of the specified work envelope. The blast cabinet is fully lined replaceable manganese cast liners of size 12” x 12” x 6mm thick for protection of cabinet against rebounding abrasive.
Spent abrasive falls after the blasting operation striking the work pieces, through perforated floor plates into hopper beneath the floor plates from which by screw conveyor it is conveyed to the boot of the belt and bucket elevator. After being elevated, all materials are fed into separator unit, and rotary sieves where oversized and fines are removed by way of the air washing and sieving, prior to the re-circulation of the clean abrasive back to the wheel unit under automatic valve control.
WHEEL UNIT MODEL: TBI CENTRIFUGAL:
The wheel unit is centrifugal (TBI) unit. An easily removable steel guard equipped with replaceable long life alloy liners encloses the wheel unit. Wheel unit includes blades, impeller and clock dial control cage for easy adjustable blasting control. The blades are held in place by centrifugal force are inserted through the center of the wheel. The shaft is mounted in anti-friction bearings contained in a sealed unit type housing featuring a visible oil level indicator gauge. Electric motor and V-belt drive drives the Wheel unit. The motor circuit includes an ammeter for registering the abrasive load.
Product Details:
Production Capacity | 2 Ton |
Usage/Application | Industrial |
Capacity | 200 |
Automation Grade | Automatic |
Automatic Grade | Automatic |
Power Source | Electrical |
Model | TBI 3CFT |
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | Wheel Blasting |
Capacity | 30 ton/day |
Usage/Application | Cleaning |
Material To Be Blasted | ferrous and non ferrous metals |
Number Of Doors | Double Door |
Surface Finish | SAE 2.5 |
Power Required | 25 Hp to 100 Hp |
Operation time | 5-20 Mins |
Phase | 3 Phase |
Color | Apple green and Steel Grey |
Backed by rich industry experience, we are engaged in manufacturing and supplying an extensive range of Spinner Hanger Shot Blasting Machine. These are fabricated using optimum quality raw material and are used to remove sand, scale and other impurities. Further, these are appreciated for their optimum quality and accurate dimensions.
Specifications:
Various models are available to handle 1 ton to 10 ton production per hour:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Machine Type | Booth Type |
Number Of Doors | Single Door |
Usage/Application | Industrial |
Color | Blue |
Frequency | 50 Hz |
Power Required | 25 |
Product Details:
Machine Type | Portable Type |
Usage/Application | Tumbling |
Material To Be Blasted | Batch capacity |
Number Of Doors | Single Door |
Surface Finish | SAE 2-2.5 |
Power Required | 12 HP |
Capacity | 5-10 ton/day |
Automation Grade | Automatic |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1 Unit |
Surface Finish | SAE 2-2.5 |
Power Required | 20HP |
Capacity | 5-10 ton/day |
Operation time | 20 mins |
General Description: The machine consists of a main blast cabinet, generally as shown on drawing upon which are mounted two standard belt driven wheels positioned as to give the blast best possible coverage of the specified work envelope. The blast cabinet is fully lined replaceable manganese cast liners of size 12” x 12” x 6mm thick for protection of cabinet against rebounding abrasive.
Spent abrasive falls after the blasting operation striking the work pieces, through perforated floor plates into hopper beneath the floor plates from which by screw conveyor it is conveyed to the boot of the belt and bucket elevator. After being elevated, all materials are fed into separator unit, and rotary sieves where oversized and fines are removed by way of the air washing and sieving, prior to the re-circulation of the clean abrasive back to the wheel unit under automatic valve control.
WHEEL UNIT MODEL: TBI CENTRIFUGAL:
The wheel unit is centrifugal (TBI) unit. An easily removable steel guard equipped with replaceable long life alloy liners encloses the wheel unit. Wheel unit includes blades, impeller and clock dial control cage for easy adjustable blasting control. The blades are held in place by centrifugal force are inserted through the center of the wheel. The shaft is mounted in anti-friction bearings contained in a sealed unit type housing featuring a visible oil level indicator gauge. Electric motor and V-belt drive drives the Wheel unit. The motor circuit includes an ammeter for registering the abrasive load.
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 500 Kg |
Application | Surface Finishing |
Automation Grade | Semi Automatic |
Power | 2 Hp |
Material | Mild Steel |
Color | Blue |
Motor Phase | Three Phase |
Voltage | 440 V |
Country of Origin | Made in India |
Product Details:
Power | 3 Hp |
Capacity | 100 Kg |
Max. Pressure | 6.5 kg/cm2 |
Material | Stainless Steel |
Automation Grade | Semi Automatic |
Application | Paint Removal, Surface Cleaning |
Die Locking Force | 0 to 10 ton |
Voltage | 220-240 V | 50 Hz |
Motor Phase | Three Phase |
Weight | 100 kg |
Dimension | 100X90X120 cm |
No. of Wheels | 3 |
Colour | Blue |
Product Details:
Minimum Order Quantity | 1 Piece(s) |
Pressure | 250 CFM |
Voltage | 440 |
Motor Speed | 2880 |
Automation Grade | Automatic |
These cabinets will consist by 3mm MS sheets pressed metal. with suitable folded section, blast room with inside rubber lining and left side one job in &outlet trolley with manual table and door. and in front of the blast room view glass and hand holes safety hand gloves and roof of the chamber lighting arrangement, in side bottom of the chamber abrasive collecting hopper with high presser auto blast pot assembling unit attach. and back of the blast chamber dust collecting room with dust bags, dust shaking arrangement, and maintenance door, along with 1. Hp suction blower
Additional Information:
Product Details:
Power | 3 kW |
Capacity | 750 Kg |
Automation Grade | Semi Automatic |
Material | Mild Steel |
Motor Phase | Three Phase |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1 Piece |
Number of Doors | Single Door |
Material to be Blasted | FERROUS AND NON FERROUS |
Machine Type | Wheel Blasting |
Capacity | 0-5 ton/day |
Size | 3 CFT |
Application | Shot Blasting / Grit Blasting / Shot Peening |
Automatic Grade | Automatic |
Product Details:
Minimum Order Quantity | 1 Unit |
Number of Doors | Single Door |
Machine Type | Wheel Blasting |
Capacity | 0-5 ton/day |
Size | 3 CFT |
Application | SHOT BLASTING / GRIT BLASTING / SHOT PEENING |
Automatic Grade | Automatic |
We strongly recommend our airless centrifugal shot blasting machines with dust collection chambers. The components are continuously tumbled during the abrasive blast cleaning process and dust collection; filter bags are shaken after blasting operation by electrically operated mechanism. This ensures speedy and total cleaning operation in single cycle and this minimizes time, expense etc.
1. SHOT BLASTING MACHINE: The main cleaning chamber is fabricated out of 6 mm thick M.S. Plates and rugged design, increases production, improved quality cleaning and cost reduction.
2. MAIN ROTOR: 300 mm dia. Main rotor is properly hardened and balanced and housed in steel castings with abrasion resistant/ wear resistant liners. The control cage (with 70°rectangular opening), blades and impeller will be of abrasion resistant material.
5. DUST COLLECTOR
A bag type dust collector, with approximately 15.25 Sq.Mt. area will be provided along with shot blasting machine. This is connected with the help of “Telescopic” ducting to the main shot blasting unit. The capacity of the dust collector is approximately 15 Cu.m. Air to cloth ratio. The dust bag made from cloth material with the right permeability are fixed between the retainer plates and hook assembly are safely clamped so that during the shaking they do not come out from the retainer plates. The top plate of the dust collector is reinforced to accommodate an exhaust fan of adequate capacity. A suitable exhaust fan with dynamically balanced impeller is mounted on the top of dust Collector to extract the dust from the shot blasting machine.
MOTOR
Rotor Motor : 7.5 H.P
Conveyor Geared Motor : 1 H.P.
Elevator Geared Motor : 1 H.P.
Exhaust Fan : 3 H.P.
Shaker : 0.5 H.P.(Optional)
Loader : 1 H.P(Optional)
6. ELECTRICAL SAFETY:
The entire machine and dust collection chambers are fully wired and controlled by electrical control panel. The controls are controlled as well as electrical panel has ample safety factor. The panel contains measuring instruments, switch fuse control gears, air break contactors, etc. The entire circuitry is auto linked; proper rating controlled and reliable for both free usages.
Overall dimensions of Machine.
Width : 1530 mm
Depth : 1700 mm
Height : 3.5 meter.
Product Details:
Minimum Order Quantity | 1 Piece |
Features | Abrasive Recovery & Re-cycling System |
Material | Steel |
Built Type | Panel Build |
Color | Silver |
Brand | Techno Bright Industries |
Frequency | 50 Hz |
Power Source | Electrical |
Usage/Application | Industrial |
Product Details:
Minimum Order Quantity | 1 Piece(s) |
Production Capacity | varies |
Country of Origin | Made in India |
These cabinets will consist by 3mm MS sheets pressed metal. with suitable folded section, blast room with inside rubber lining and left side one job in &outlet trolley with manual table and door. and in front of the blast room view glass and hand holes safety hand gloves and roof of the chamber lighting arrangement, in side bottom of the chamber abrasive collecting hopper with high presser auto blast pot assembling unit attach. and back of the blast chamber dust collecting room with dust bags, dust shaking arrangement, and maintenance door, along with 1. Hp suction blower
Additional Information: